QUICK LINK MULTI PLIERS (REMOVE/CONNECT)
A quick link (also called "missing link") is an open chain link which can be assembled and disassembled quickly and easily. There is not even a chain drive tool required to open or close your chain with this simple link. The Trivio Quick Link multi pliers assemble and disassemble such a link within seconds.
CRANKBOLT WRENCH TOOL 8/14MM
Trivio tools are made of hardened quality steel and equipped with ergonomic handle. These properties allow you to bring full power on the tool. With this crankbolt wrench you will mount and demount your standard crank with bolt effortlessly.
CHAIN CLEANER DELUXE
With the Chain Cleaner Deluxe you can clean your chain in no time. The rotating brushes scrub every link to the smallest corner so that your chain shines like new. Fill the bottom of this handy device with degreaser and then install it on the chain. With the folding clip you can mount the Chain Cleaner to the rear derailleur. Then turn the pedal so that the chain runs smoothly through the unit. After a few rotations, your chain will be cleaned and ready to be lubricated.
SPROCKET / FREEWHEEL REMOVER CAMPAGNOLO
Trivio tools are made of hardened quality steel and equipped with ergonomic handle. These properties allow you to bring full power on the tool. This cassette removal tool disassembles every Campagnolo cassette or freewheel effortlessly.
CRANK PULLER SHIMANO COMPATIBLE
Disassemble your Shimano crankset without damaging it with the Trivio crank puller. Screw the puller into the crank and turn it untill it is pushed off the axis. The Trivio crank puller is made of hardened quality steel and provides a good grip.
CRANKBOLT MOUNTING TOOL SHIMANO/SRAM/RACEFACE
Mounting a crank becomes easy with this handy crank bolt mounting key. Both the serrated Shimano crank bolt and the hexagonal Sram and Raceface crank bolts are easily loosened and tightened with this handy tool. The wide wings offer grip and hold. This allows you to put more power on it so that even rusted bolts come off. If even that does not work, there is also the possibility of creating a larger lever through the socket recess.